If you’re a Tri‑Cities homeowner hunting for a new concrete driveway, the first step is ripping out that cracked, uneven slab and hauling it away. Next, we dig down and lay a compacted gravel base, usually 4‑6 inches, to keep the surface from settling over time. We then shape the forms and set a gentle 1‑2% slope so rain runs off and never pools on your drive. Rebar or welded wire mesh is installed inside the forms to stop cracking and give the slab the strength it needs. The concrete is poured to a minimum of 4‑inch thickness for passenger cars and 5‑inch if you’ll park trucks or heavy equipment. After the pour, we keep the slab moist for at least 7 days, allowing it to cure properly and stay crack‑free.
We lay a sturdy new concrete driveway that lasts. First we clear the area and dig to the proper depth. A compact gravel base is spread and leveled. Forms are set straight and rebar is placed for strength. The mix is poured, smoothed, and finished with a proper slope for drainage.
We work on a schedule that fits your life. Our crew arrives on the promised day and starts on time. Every step is timed to keep the project moving. We finish the slab before the weather turns bad. You get a finished driveway without endless delays.
Our pricing is transparent from the first call. We break down costs for prep, forms, rebar, and concrete. No hidden fees appear after the work starts. You know exactly what you’re paying for each phase. The final bill matches the estimate we gave you.
Our local crew knows the area and the soil conditions. We use the right base thickness for your climate. The team is experienced in placing and finishing concrete. They watch the cure process to prevent shrink cracks. Call us at (888) 405-6638 to set up your job.
Prep matters more than the concrete itself. We excavate to remove soft soil and install a compacted stone base. Forms are nailed tight and checked for levelness. Rebar or wire mesh is cut to fit and tied securely. Proper slope is cut into the base to keep water away from your home.
We stay until the concrete cures properly. The slab is kept moist with curing blankets or mist. We monitor for cracks and repair any early signs. After cure, we remove forms and clean the site. Your new driveway is ready for traffic and looks solid.
{"response":"We’ve been laying new concrete driveways across the Tri‑Cities for years, from Richland to West Richland and the surrounding towns. Our crews know the soil in Five Corners, Finley, and Prosser, so we prep the base right every time. We set sturdy forms, add rebar, and grade a proper slope for drainage to keep water off your car. The slab is poured to a minimum of four inches for residential traffic, then cured with a thin‑coat seal to stop cracking. Pricing is clear and upfront—no hidden fees, just a flat rate per square foot. Call us at (888) 405‑6638 for a free, no‑obligation quote."}
After seeing how hard it can be to find dependable new concrete driveway, the owner — a retired US Navy veteran — built this website and network to connect homeowners like you with local professionals who show up, do the prep, and leave the place looking the way it should.
We roll up early, bring the trucks and tools, and start digging the base. The crew clears the grass, rocks, and any loose soil. We compact the subgrade to a solid, level surface. Then we set wooden forms to the exact driveway outline. Finally we pour the concrete and level it smooth, ready for finishing.
We don't sugar‑coat the process. You get a clear timeline from prep to cure. We explain why a proper slope is crucial for drainage. You’ll know why we add rebar and control joints. No hidden fees, just honest work.
Your driveway must last, so we start with a clean, graded base. We spread a 4‑inch crushed stone layer and tamp it down. Forms are set square, with a 1‑2% slope away from the house. We pour a minimum 4‑inch slab, reinforced with welded mesh. After curing, we walk the site with you to confirm it meets your expectations.
Quality starts at the ground. We test soil compaction before any concrete arrives. The mix is ordered for the right strength and air content. We finish with a broom or trowel texture to match your preference. Proper curing for at least seven days prevents early cracks.
Serving the Tri‑Cities area, we reach Spokane, Pasco, and Richland quickly. Our crew can handle any size job, from a single‑car lane to a large two‑lane driveway. We bring all equipment, so you won’t need extra rentals. Scheduling fits your timeline, often within a week of the quote. We keep a clean site, hauling away debris as we go.
Ready to get started? Call us at (888) 405-6638 to set up a free site visit. We’ll assess the soil, discuss design options, and give a firm price. No pressure, just a clear plan. You’ll know exactly what to expect from start to finish. Let’s give you a solid driveway that lasts.
By submitting your information through this form or by providing it during a phone call, you consent to having your personal details (such as name, email, phone number, and any other information you provide) transmitted directly to our trusted service provider for the purpose of responding to your inquiry or request.
We do not store, process, or retain your information on this website. Your details are sent securely and exclusively to the service provider and are not shared with any other third parties.
We are committed to protecting your privacy and handling your information responsibly. If you have any questions about this practice, please contact us.